Sheet Metal Fabrication

Sheet Metal Fabrication in Central Texas

Custom sheet metal components and assemblies built from your drawings, from a single prototype to repeat production.

Technical illustration: a sheet metal bracket shown as a laser-cut flat pattern and as the formed part after a 90-degree bend IRONTRAIL PRECISIONPART BRKT-0101FLAT / FORMEDREV ASCALE NTS BEND UP 90°6.0004.0201.520FLAT PATTERN FORM FORMED PARTR .12Ø .312 THRU · 4X

Custom Sheet Metal Fabrication

Sheet metal fabrication turns flat sheet into finished parts through cutting, forming, joining, and finishing. Based in Salado, IronTrail Precision supports manufacturers and engineering teams in Austin, Round Rock, Georgetown, Temple, Waco, and across Central Texas, as well as customers throughout the United States, with each job planned from your drawing through final verification.

Because laser cutting, CNC bending, and welding and assembly requirements are reviewed together as one project, design questions are resolved at the start, with one point of contact from quotation to delivery.

What We Fabricate

Custom Metal Components

Brackets, panels, covers, enclosures, chassis, guards, mounting plates, and frames built to your specifications.

Precision Sheet Metal Parts

Parts where hole positions, flatness, bend angles, and feature locations matter, such as components that mate with machined parts, circuit boards, or other assemblies.

Prototyping

Low-quantity parts for fit, form, and function testing. Manufacturability feedback gathered during prototyping carries directly into production.

Small-Batch Manufacturing

Practical quantities for pilot builds, spare parts, field retrofits, and low-volume equipment, without the commitment of a large production run.

Production Fabrication

Repeat orders made to the approved revision, with flat patterns and forming details documented so parts match from order to order.

Sheet Metal Assemblies

Formed parts combined with welding, self-clinching hardware, and fasteners into subassemblies ready for your production line.

How a Sheet Metal Part Moves from Drawing to Delivery

Not every part needs every step. The route for each job is planned during drawing review. Manufacturing services are coordinated based on project specifications, material requirements, and production needs.

  1. Drawing review Models, drawings, materials, and tolerances are reviewed, and questions are raised before production.
  2. Laser cutting Flat blanks, holes, and features are cut from sheet.
  3. Deburring Cut edges are cleaned for safe handling and forming.
  4. CNC bending Flanges and features are formed in a planned sequence.
  5. Welding & hardware Components are joined and hardware is installed.
  6. Verification Critical dimensions are checked against your drawing before release.

Design Guidelines for Sheet Metal Parts

These general guidelines help most parts fabricate cleanly. Actual limits depend on material, thickness, and tooling, and your specific design will be reviewed before quoting.

Bend radius
An inside bend radius about equal to the material thickness is a practical starting point for many steel and aluminum parts. Harder alloys, such as 6061-T6 aluminum, generally need larger radii to avoid cracking.
Flange length
Keep formed flanges at least about four times the material thickness so the part is supported across the die opening.
Holes near bends
Place holes and slots at least about 2.5 times the material thickness plus the bend radius away from a bend to limit distortion.
Hole size
Hole diameters at least equal to the material thickness generally cut cleanly.
Bend relief
Add relief cuts where a bend meets an edge to prevent tearing. Relief width should be at least the material thickness.
Tolerances
Apply tight tolerances only where the function requires them. Formed dimensions typically vary more than laser-cut features.
Files
Send a 3D STEP model and a dimensioned PDF drawing. A DXF flat pattern is welcome; bend allowances will be confirmed for the material and tooling used.

These are general industry guidelines, not IronTrail Precision capability limits. Feasibility is confirmed for each project during review. See drawing requirements.

Have a drawing ready?

Send your drawings and requirements. Accepted formats: PDF · DXF · DWG · STEP · STP.